jeudi 25 février 2016

How to install Crossepg Plugin on spark system.

Crossepg guide  

 

How to install Crossepg Plugin on spark system.

1) USB installation:

  1. Copy plugin folder to the root directory of first partition of USB stick (like c: /plugin/var).
  2. Connect USB stick to stb. Stb shall prompt a message to user to upgrade plugin.

2) Ftp installation:

  1. Ftp to stb and copy plugin folder to /root.
  2. Better wait for sometime (10-20 seconds) because stb may need to flush cache data to nand flash.
  1.  http://www.swtools.biz/2016/02/25/how-to-install-crossepg-plugin-on-spark-system-2/

 

3) Online installation

If you’ve already got plugin-installer installed then go to Menu > Plugin > plugin-installer to connect plugin online server and install CrossEPG.

 

How to setup Crossepg to download EPG from online provider

If you’ve already got CrossEPG installed then go to Menu > Plugin > CrossEPG to setup the general configuration.

  1.  http://www.swtools.biz/2016/02/25/how-to-install-crossepg-plugin-on-spark-system-2/

 

  1. Go to menu/plugin, select Crossepg and press OK, and then press red button go to crossepg menu

2, Select configure and press OK….Set options as required: Change scheduled download to once a day as for most users this is enough……
3. After configuration, Press exit for BACK.
4. Set what providers that you want to use for download EPG data. Do not select more than what you actually use and need. Selecting too many will cause memory issues. For example, select Open TV Providers > move highlight to SkyUK –astra2-28.2, press OK to active this provider, you can also direct press PLAY button to download EPG data with this provider.
5, after provider selection, press exit for BACK.

6, Select providers start order and press OK, you will see all active providers.

  1. Press exit for BACK.

8, Select Download now and press OK to download EPG data with all active providers.

 

Once the download and data conversion is done, you should get a fully EPG

How to setup Crossepg to load EPG data from storage device

NOTICE: only support .CSV and .binary file to load.

  1. Go to menu/plugin, select Crossepg and press OK, and then press red button go to crossepg menu
  2. Select configure and press OK, Using left & right buttons set the EPG location at storage device option (please confirm EPG data file exist at your select location).Set enable CSV import to yes.
  3. Press exit for BACK.
  4. Select Force csv import now and press OK to load EPG data.
  5. http://www.swtools.biz/2016/02/25/how-to-install-crossepg-plugin-on-spark-system-2/

 

http://www.swtools.biz/2016/02/25/how-to-install-crossepg-plugin-on-spark-system-2/

 

Share:

0 commentaires:

Enregistrer un commentaire

Nombre total de pages vues

Popular Posts

Blog Archive

Fourni par Blogger.

Copyright © start days | Powered by Blogger Design by PWT | Blogger Theme by NewBloggerThemes.com